Product introduction:Walk-in environmental laboratory is divided into (walk-in constant temperature and humidity test room walk-in high and low temperature (damp heat) laboratory, walk-in aging room),
Product introduction:
Walk-in environmental laboratory is divided into (walk-in constant temperature and humidity test room walk-in high and low temperature (damp heat) laboratory, walk-in aging room), is to provide industry with large parts, semi-finished products, finished products, temperature and humidity environment testing, such as: computer terminals, automotive parts furniture, electronic and electrical products, toys, batteries, monitors, automotive electronics, power supplies, motherboards, monitors, switchable chargers and other products for batch constant humidity and heat, Switching chargers and other products for batch constant humidity and heat, suitable for testing a large number of products, large volume of test equipment
Features:
1. Stainless steel and steel plate baking paint material, strong structure, waterproof, beautiful appearance. The inner volume can be enlarged at will, easy to disassemble, and can be designed according to customer's needs.
2. LCD touch screen controller, Chinese and English display, easy to operate.
3. Original imported compressor, and the use of environmentally friendly refrigerant, refrigeration system using a binary low-temperature circuit system design to increase the service life of the equipment.
4. The use of multi-jib type fan strong air circulation system to avoid any dead ends, so that the indoor temperature and humidity distribution is uniform.
5 with a number of expansion functions:
Control system through the RS-232 interface and computer connection, users can set the program on the computer screen, collect test data and records, call the program execution, remote control machine switch and other functions. Specially designed low humidity dehumidification device, the lowest conditions up to 5 ° C ~ 5% RH. can be added temperature and humidity recorder to provide the actual temperature record curve.
6. Complete safety protection device
When abnormal conditions occur, the controller screen automatically displays the fault status, cut off the power switch, and provide troubleshooting methods.
Self-developed programmable controller interface Process editing interface
Specification table:According to our specific datasheet
| Product Type | Walk-in high and low temperature test chamber | Walk-in constant temperature and humidity test chamber | Walk-in aging room |
| Studio volume | Size according to customer requirements | ||
| Temperature range | Maximum test temperature: 150℃, minimum temperature: -70℃, -40℃, -20℃ | ||
| Humidity range | 30%~98% | ||
| Temperature rise and fall rate | 1℃~15℃/min(can be customized according to customer's requirement) | ||
| Inner box material | Stainless steel material | ||
| Outer box material | Steel plate baking paint | ||
| Box door size | Can be customized according to customer requirements | ||
| Insulation material | Fireproof PU foam 110mm(150mm) | ||
| Cooling method | Single-stage refrigeration, below -40 ℃ (including) two-stage stacked system, cooling mode air-cooled | ||
| Power supply | AC,220/380V,50/60HZ | ||
FAQ
Q :How to provide after sales service?
A:If customers need our engineers on site service, the company only need pay the ticket accommodation to our engineers, service is for free.
If Products still can't use after our engineers repair, we will produce a new test chamber (same as the old one) to our customers with no charge.
You can contact our local service center in overseas market to get service and product.
Q :Do you have an agent?
A:Currently we have agents in Europe, Asia, North America, South Africa, and can provide sales and technical services.
Q :Can we come to your factory to study and train?
A:Welcome to our factory for study and training, we provide this service free of charge.
Q :Can you send engineers to our company?
A:Yes, sure. We will communicate in advance to facilitate the bringing of tools and components
Q :Can I install and debug calibration on site?
A :Yes, we can send technicians and engineers to the customer site for installation, commissioning and calibration.
Q :What are the modes of transportation?
A :Air, sea, rail, multimodal transport.
Q :What is the packaging?
A :Standard export wooden box packaging, solid and firm.
Q :How do you calibrate the equipment?
A :We have our own calibration and third-party calibration such as ISO17025
Q: Is there a door to door service?
A :Yes, there is door to door service. We will arrange a one-stop service.
Q :What are the payment methods?
A Payment methods are T/T, Paypal, L/C, VISA
Q:How long is the warranty period?
A :Warranty period is 3 years, free service for life
Q :Can you ship quickly?
A :Our delivery period is 3-21 days. Some of the hot-selling equipments are in stock and can be shipped within 1-3 days.
