Stainless Steel Glove Box with Purification System for lab research use and chemical research use
Stainless Steel Glove Box with Purification System for lab research use and chemical research use
- Model：
Stainless Steel Glove Box with Purification System for lab research use and chemical research use. Kingpo supplies this as a calibrated laboratory item, machined or assembled in-house and inspected before despatch. It is built for the measurement named in the applicable standard, and it ships with a calibration certificate so it can be put straight into service.
What it is used for
- The measurement or dimensional check named in the applicable standard
- Repeatable set-up so results are comparable between runs and laboratories
- Documented output for the test report
Specification
| Item | Stainless Steel Glove Box with Purification System for lab research use and chemical research use |
| Material / construction | Hardened tool steel or stainless steel |
| Calibration | Calibration certificate supplied |
| Made by | Kingpo — machined, inspected and calibrated in-house |
Typical applications
- Third-party and notified-body testing, where the item has to be traceable to the standard
- Manufacturer incoming inspection and production release testing
- Design verification during development, before the protocol is frozen
How it is used
- Confirm the standard and clause you are testing against.
- Set the item up in the configuration the standard shows.
- Take the reading or run the sequence the standard specifies.
- Record the result with the sample identification and the calibration reference.
Care and calibration
Treat the item as an inspection tool rather than a production tool. Keep it clean and dry, store it protected, and re-calibrate on a cycle driven by how often it is used. Recording the item identity alongside every result is what makes a test report defensible later.
Buying notes
Send us the standard, the figure or clause number and the quantity. That is enough for us to quote and to tell you whether this is the right item for your protocol.
Frequently asked questions
Is a calibration certificate included?
Yes.
Can it be made to a customer drawing?
Yes — send the drawing and we will quote against it.
Which edition of the standard does it conform to?
Tell us the edition you are testing to and we will confirm before you order; editions differ and the dimensional limits are not always identical.
Do you ship spares or replacement parts?
Yes, for items we have built — send the item reference and we will identify the part.
Related gauges and equipment
Other equipment in the same range:
- Charge And Discharge Battery Testing Machine Minimum Output Current 150mA
- RCDS-100V200A Technical Specification for battrry Charge and Discharge Equipment
- KP-5067-C Battery Testing Services , Battery Compression Tester PLC Control
- KP-PC-5000A Battery High Current Short Circuit Tester，Battery Tester
- High Stability Electrodynamic Vibration Shaker System Computer Control EV103VT
- 72V5A 4ch Battery Testing Machine High Precision And Energy Saving Feedback Type Battery Capacity Tester
Send the standard, figure number and quantity to Kingpo technical sales for a quotation and delivery date.
Parameters of the Stainless Steel Glove Box with Purification System for lab research use and chemical research use. Dimensions and limits are confirmed against the applicable standard before despatch.
| Item | Stainless Steel Glove Box with Purification System for lab research use and chemical research use |
| Construction | Bench instrument; details on the specification sheet |
| Scope of supply | Item and calibration certificate |
| Calibration | Calibration certificate supplied; re-calibration available |
| Origin | Kingpo — machined, inspected and calibrated in-house |
Custom versions, alternative materials and re-calibration are available. Send the standard, figure number and quantity for a quotation.