Figure C.1 Female Reference Luer Lock Connector For Testing Male Luer Connectors Leakage
Figure C.1 Female Reference Luer Lock Connector For Testing Male Luer Connectors Leakage
- Model： ISO 80369-7 Fig C.1
Figure C.1 Female Reference Luer Lock Connector For Testing Male Luer Connectors Leakage. Kingpo supplies this as a calibrated laboratory item, machined or assembled in-house and inspected before despatch. It is built for the measurement named in the applicable standard, and it ships with a calibration certificate so it can be put straight into service.
What it is used for
- The measurement or dimensional check named in the applicable standard
- Repeatable set-up so results are comparable between runs and laboratories
- Documented output for the test report
Specification
| Item | Figure C.1 Female Reference Luer Lock Connector For Testing Male Luer Connectors Leakage |
| Material / construction | Hardened tool steel or stainless steel |
| Calibration | Calibration certificate supplied |
| Made by | Kingpo — machined, inspected and calibrated in-house |
Typical applications
- Third-party and notified-body testing, where the item has to be traceable to the standard
- Manufacturer incoming inspection and production release testing
- Design verification during development, before the protocol is frozen
How it is used
- Confirm the standard and clause you are testing against.
- Set the item up in the configuration the standard shows.
- Take the reading or run the sequence the standard specifies.
- Record the result with the sample identification and the calibration reference.
Care and calibration
Treat the item as an inspection tool rather than a production tool. Keep it clean and dry, store it protected, and re-calibrate on a cycle driven by how often it is used. Recording the item identity alongside every result is what makes a test report defensible later.
Buying notes
Send us the standard, the figure or clause number and the quantity. That is enough for us to quote and to tell you whether this is the right item for your protocol.
Frequently asked questions
Is a calibration certificate included?
Yes.
Can it be made to a customer drawing?
Yes — send the drawing and we will quote against it.
Which edition of the standard does it conform to?
Tell us the edition you are testing to and we will confirm before you order; editions differ and the dimensional limits are not always identical.
Do you ship spares or replacement parts?
Yes, for items we have built — send the item reference and we will identify the part.
Related gauges and equipment
Other equipment in the same range:
- IEC 60601-1-Figure 34 Spark Ignition Test Apparatus
- ANSIAAMI EC12：2000(R2005) Disposable ECG Electrode Performance Tester
- IEC 60601-1 Grips And Other Handling Devices-7 Cm Strap Tester
- ISO 9360-1 Heat And Moisture Exchangers (HMEs) For Humidifying Respired Gases In Humans-Measurement Of Moisture Loss
- ISO 23328-1 Conditioning Apparatus For BSF
- Surgical Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control
Send the standard, figure number and quantity to Kingpo technical sales for a quotation and delivery date.
Parameters of the Figure C.1 Female Reference Luer Lock Connector For Testing Male Luer Connectors Leakage. Dimensions follow the figure or clause named above.
| Figure / clause | Figure C.1 |
| Item | Figure C.1 Female Reference Luer Lock Connector For Testing Male Luer Connectors Leakage |
| Construction | Bench instrument; details on the specification sheet |
| Scope of supply | Item and calibration certificate |
| Calibration | Calibration certificate supplied; re-calibration available |
| Origin | Kingpo — machined, inspected and calibrated in-house |
Custom versions, alternative materials and re-calibration are available. Send the standard, figure number and quantity for a quotation.