GB 19083-2010 Electrical Safety Test Equipment Mask Tightness Tester

ZR – 1220 model

Mask tightness tester

Product introduction

ZR - 1220 type respirator fit tester is a mask/respirator fit test of special equipment, at the same time compatible with OSHA and GB GB 19083-2010 medical respirator technical requirements of the respirator fit test on, widely applicable to mask manufacturers, the national labor protection articles inspection institution to related the mask products testing and inspection.

Executive standard

GB 19083-2010 Technical requirements for medical protective masks

Technical characteristics

• Condensation nuclear particle detection to ensure the detection accuracy;

• Automatic cleaning of measuring chamber, automatic switching of air path, simple and fast to use;

• All Chinese operation interface, support Chinese input;

• Large-sized touch screen for data observation and operation;

• Special upper computer test software, convenient for data storage and analysis;

• Built-in large capacity memory, can store test results, process information and other data;

• At the same time compatible with OSHA, national standards and other standards, and can customize the test standards;

• Can automatically generate test reports, unlimited historical data storage and query.

Technical indicators

GB 19083-2010 Electrical Safety Test Equipment Mask Tightness Tester. Kingpo builds this as a complete bench instrument for the filtration and breathing-resistance measurements that mask and respirator standards call for: controlled flow, conditioned challenge aerosol or gas, and the measurement chain to read the result.

What it measures

• The quantity named in the applicable standard — filtration efficiency, breathing resistance, or fit
• Flow held at the setpoint through the whole measurement
• Result calculated and displayed, with the run retained for the report

Specification

How a test run works

1. Condition the samples at the temperature and humidity the standard requires.
2. Mount the sample in the holder and check the seal; leaks dominate this measurement.
3. Set the flow rate and, for filtration tests, generate and neutralise the challenge aerosol.
4. Run upstream and downstream sampling for the period the standard specifies.
5. Calculate the result and record it with the batch reference.

Buying notes

Confirm which standard your market requires — GB 19083, EN 149, ASTM F2100 and NIOSH procedures differ in flow rate, challenge aerosol and acceptance criteria. Sending us the standard number is the fastest way to the right configuration.

Frequently asked questions

Which standards does it cover?

Tell us the standard and we will confirm the configuration; the flow range, aerosol generator and sampling arrangement are set to match it.

Is the aerosol generator included?

It depends on the configuration — some models include it, others use a separate generator.

Is calibration included?

Yes, a calibration certificate is supplied.

Related gauges and equipment

Other equipment in the same range:

• IEC 60601-1-Figure 34 Spark Ignition Test Apparatus
• ANSIAAMI EC12：2000(R2005) Disposable ECG Electrode Performance Tester
• IEC 60601-1 Grips And Other Handling Devices-7 Cm Strap Tester
• ISO 9360-1 Heat And Moisture Exchangers (HMEs) For Humidifying Respired Gases In Humans-Measurement Of Moisture Loss
• ISO 23328-1 Conditioning Apparatus For BSF
• Surgical Mask Tester Surface Moisture Permeability Tester Height Adjustable Manual Control

Send the standard, figure number and quantity to Kingpo technical sales for a quotation and delivery date.